With paving season in full swing, the asphalt plant on Second Avenue now heats up early and runs all day long.

In a continual, deafening roar, Lindy Paving’s conveyor belts and screening machines and giant, rotating drum kiln begin rolling and shaking and mixing at 4:30 a.m. to fill the demand for paving material from the trucks that begin lining up at dawn.

After a long season of freeze and thaw, bent car frames and swallowed axles, the region’s towns, cities, highways and parking lots are hungry for asphalt.

“We’re close — we’re trying to catch up,” said Ryan Mitchell, a plant manager, as a front loader dumped tons of sand into a bin feeding the company’s massive asphalt mixer and the biting scent of hot petroleum wafted through the air.

Advertise with us

On a recent morning, the company was working at full capacity of about 500 tons of asphalt produced each hour to refill the silo everyone wanted: the “wearing course” or finely crushed aggregate asphalt that many municipalities use to fill potholes and top off rebuilt roads.

While a few of the six, 300-ton silos were partially full, operators inside a control booth overlooking the plant were working steadily to refill the wearing course silo, where hardly more remained than one large truckload.

Several tri-axle trucks — one a county truck delivering asphalt to a project on Middle Road in the North Hills, another a Lindy Paving truck delivering asphalt to Solway Street in Squirrel Hill — lined up beneath the silo, waiting for a trap door to open and for hot asphalt to pour down into the bed of the truck.

The trucks can carry from 22 to 26 tons and often have heated beds to keep the asphalt pliable until it is used.

In the control room, the level inside the silo registered 29 tons, then slowly began adding one ton, then another, to the supply.

Advertise with us

More trucks pulled through the plant’s front gate, and many would probably return later in the day for as many as six additional loads as road crews advanced their patching and repaving, Mr. Mitchell said.

“When PennDOT crews are working on the parkway overnight, we run around the clock,” he said.

Company officials at Lindy don’t exactly wax poetic about asphalt production, especially on busy days when paving crews are anxious to start work, trucks arrive in droves and plant workers are all business, consumed with mixes and numbers.

At Lindy, asphalt production begins with “mix designs” with varying types of aggregate — different weights of sand and sizes of crushed limestone and percentages of liquid asphalt — that are created by technicians inside the plant’s laboratory. The design mixes are then sent to PennDOT for state approval.

Once the design is approved, paving asphalt is made by combining sand with crushed limestone — larger pieces for the base layers of a roadway, finer pieces for the top layer — that is mined from a quarry in Blairsville, Indiana County, and delivered by river barge.

Advertise with us

Then plant operators add liquid asphalt, a gooey petroleum byproduct of refining crude oil into gasoline and other fuel that the company trucks in from terminals in Elizabeth and Springdale townships.

Crushed asphalt, reclaimed from milling soon-to-be-resurfaced roads around the region and sold back to the plant, also is added in varying amounts, depending on the mix design.

Asphalt is among the most frequently recycled materials in the country; 99 percent of all used asphalt is recycled, according to federal estimates.

At the plant, front loaders dig into the mountains of limestone and sand heaped between the Monongahela River and Second Avenue and, while keeping each material separate, fill the six bins that open onto a conveyor belt. The belt feeds into a machine that shakes the aggregate onto massive, jiggling screens, kicking out oversized rocks and sending the remainder into the “drum,” a giant rotating cylinder with a natural-gas torch on one end.

Inside the drum, the aggregate is superheated to 300 degrees, driving out excess moisture.

Advertise with us

Liquid asphalt is added, and the mix is churned inside the drum for approximately 20 minutes, then released onto the “drag,” a long vertical conveyor belt that pulls the mix to the top of the appropriate silo and dumps it in.

Under the silos, the bed of each truck is automatically sprayed with a nonstick agent, then the truck is driven onto a computerized scale that weighs it empty. The appropriate load is poured into the truck from the silo above, the computer weighs the truck again, and the driver moves on to collect his sales ticket, which is calculated and printed automatically.

The system is designed to free drivers from leaving their vehicles, and to move trucks through the plant as efficiently as possible, Paul Reiner, Lindy’s general plant manager, said.

Throughout production, the asphalt mix is tested by lab technicians at the plant approximately every 1,000 tons to ensure it contains the appropriate percentages and densities of material, and boxes of the mix also are sent from local road construction sites to Harrisburg for additional testing, Mr. Reiner said.

Checking the asphalt’s composition helps ensure a smooth and safe driving surface to protect the public — and state officials also want to make sure they’re getting what they pay for.

Amy McConnell Schaarsmith: aschaarsmith@post-gazette.com.