WASHINGTON — The glass appears to be half full for U.S. Rep. Glenn Thompson’s bill allowing whole milk to return to school cafeterias nationwide.

With strong bipartisan support, the House on Wednesday easily passed Mr. Thompson’s Whole Milk for Healthy Kids Act, which lets schools offer full-fat milk, or milk with 3.25% milk fat, for the first time in more than a decade. Fat-free or low-fat (1%) milk have been the only options in school refrigerators after a 2010 law to help combat childhood obesity mandated lower-fat products in federally funded lunch programs.

Mr. Thompson, R-Centre, the bill’s lead sponsor and chair of the House Agriculture Committee, says the move could inspire more kids to choose milk over sugary drinks, and help boost a $12 million dairy industry in Pennsylvania. Pennsylvania ranks 8th in total milk production in the U.S. and has the second-most dairy farms after Wisconsin.

“Milk is an essential building block for a well-rounded and balanced diet, offering 13 essential nutrients and numerous health benefits,” Mr. Thompson said after the bill passed 330-99. “However, out-of-touch and outdated federal regulations have imposed restrictions on the types of milk students have access to in school meals.”

Advertise with us

The dairy industry and farm groups wholeheartedly back the bill. Mr. Thompson received more campaign donations from the dairy industry than any other member of Congress during the last election — $75,610, according to the research group OpenSecrets.

“Pennsylvania Farm Bureau members have waited for over a decade to see progress made on getting whole and 2% milk back in schools,” said Chris Hoffman, the bureau’s president. “Of course, our dairy farmers are going to see benefits of this legislation, but America’s students and families are also beneficiaries. School meals provide nutritional equity and food security. Low-income families who already are struggling to put dinner on the table cannot afford to purchase the most expensive type of milk.”

On top of limiting the types of milk served as part of school meals, the Obama-era rules set standards for school wellness policies, reduced portion sizes in meals, set minimum requirements for servings of fruits, vegetables and whole grains, and set limits on salt and sugar.

Health groups dismissed the new bill to allow whole milk back into the cafeteria and argue school meal requirements should continue to stick to the Dietary Guidelines for Americans, which recommend fat-free or low-fat dairy products.

“How many parents would turn to their members of Congress for nutrition advice for their children instead of health experts?” said Meghan Maroney, campaign manager for federal child nutrition programs at the Center for Science in the Public Interest. “It’s absurd. Nutrition standards for school meals should be based on science, not on regurgitated talking points from the dairy industry or any other industry.”

Advertise with us

While some Democrats point to concerns about whole milk’s higher calories, saturated fat and cholesterol, the bill received bipartisan support and reached the House floor with more than 130 cosponsors. The lead co-sponsor was Rep. Kim Schrier, D-Wash., a former physician, and Rep. Chris Deluzio, D-Aspinwall, cosponsored as well.

Democrats previously shot down the bill after Mr. Thompson initially introduced it in 2021.

U.S. Sen. John Fetterman, D-Pa., is one of the original cosponsors of the bipartisan companion bill in the Senate. That bill was introduced in June and has been referred to the chamber’s Agriculture, Nutrition and Forestry Committee.

In other Washington news:

Deluzio among first endorsements by Michigan Gov. Whitmer’s PAC

A political action committee launched by Michigan Gov. Gretchen Whitmer chose Mr. Deluzio among its first group of congressional endorsements for 2024.

Advertise with us

Ms. Whitmer, who co-chairs the Biden-Harris re-election campaign, is often named along with Pennsylvania Gov. Josh Shapiro as a potential Democratic contender for the White House in 2028.

Her “Fight Like Hell” PAC — one of several PACs and advocacy groups established by high-profile Democrats potentially eyeing presidential bids — says it aims to raise money for federal candidates to help re-elect President Joe Biden, flip the House and hold Democrats’ slim majority in the Senate. The group said its first slate of endorsements, which along with Mr. Deluzio included Rep. Susan Wild, D-Lehigh, are eight incumbents “who are unapologetic in their fight for working people and their basic freedoms.”

Ms. Whitmer said in a statement that the candidates are “fighting like hell for everyday Americans and the will of the majority,” and that they’ve proven their dedication “to addressing kitchen table issues and defending our everyday freedoms.”

Mr. Deluzio defeated businessman and former Ross Township commissioner Jeremy Shaffer in one of the most expensive congressional contests in Pennsylvania last year. Republicans have argued he is too progressive for the swing 17th district, which features both suburban voters who’ve broken with the Trump era GOP and rural voters who’ve largely turned away from Democrats.

Republican state Rep. Rob Mercuri, R-Allegheny, is running for Mr. Deluzio’s seat. The Rev. Jim Nelson, a veteran and former law enforcement officer, was the first Republican to announce his candidacy for the seat, but he withdrew in November.

Advertise with us

Reps. Mike Kelly, Deluzio press DOE to help Butler steel plan with new course on electrical grid rules

A steel facility in Butler and more than 1,000 jobs could be on the line pending electrical grid rule changes proposed by the Biden administration, according to Reps. Mike Kelly, R-Butler, and Mr. Deluzio.

The pair recently urged Energy Secretary Jennifer Granholm to change gears on an energy-savings proposal that would force manufacturers of electric distribution transformers to use amorphous metal cores instead of traditional grain-oriented steel cores that are produced in just one plant in the U.S. — Cleveland Cliffs-owned Butler Works.

Commonly found on platforms or utility poles across the U.S. power grid, transformers help deliver power from high voltage lines to residential and commercial lines, or increase voltage depending on the customer. Amorphous metal transformer cores rely on an ultra-thin steel compared to the more traditional electrical steel.

DOE says the newer, slightly more expensive product “has lower core losses,” leading to a significant amount of energy and long-term cost savings. The proposed rule would also cut the equivalent of more than 330 million metric tons of carbon dioxide emissions over the next three decades, DOE says.

While the Western Pennsylvania facility is the lone producer of grain-oriented electrical steel cores, there also is only one amorphous metal manufacturer in the U.S. — South Carolina-based Metglas.

Advertise with us

The Butler facility is represented by more than 1,300 United Auto Workers employees, and the rule change could jeopardize the plant as well as 1,500 jobs nationwide, while leaving the electrical grid even more reliant on imports, the congressmen wrote.

The proposed change comes as the Biden administration seeks to ramp up domestic production of distribution transformers and efficient grid components, while incentivizing replacing older, less-efficient equipment through rebates in the bipartisan infrastructure law.

But utilities and manufacturers say the proposed transformer standards would compound existing shortages and force producers to rely on more imports of raw materials.

“Finalizing this rule would significantly impact the production of distribution transformers, which are already difficult to obtain," the congressmen wrote. "Grid security and reliability are vital to our economic and national security. We respectfully urge you to make serious modifications that preserve utilization of [grain-oriented electrical steel] for transformer cores to the proposed rule.”

The lawmakers also say distribution transformers are already more than 97% energy efficient.

Advertise with us

They added that demand for distribution transformers far exceeds current rates of production; the lead time for producing a transformer is more than 16 months, in part due to supply chain constraints.

"This rule would severely limit the ability of our utility providers to ensure grid reliability and security while making us dependent on foreign imports of amorphous metal," they wrote.

Benjamin Kail: bkail@post-gazette.com; @BenKail