My wife doesn’t love me any less for being a poor handyman. Of course, she doesn’t love me any more for it either.
I get it. When even your best DIY projects look like they were accomplished by a chimpanzee with both a short attention span and a palsy of some sort, you don’t waste time waiting for applause.
So buyer — or maker — beware, should you try to replicate this.
Pennsylvania’s archery deer hunting season is fast approaching; it begins statewide Oct. 4. It starts even sooner, Sept. 20 in Wildlife Management Unit 2B, which takes in all of Allegheny County and parts of Beaver, Butler, Washington and Westmoreland counties. If you haven’t been practicing with your bow — be it a recurve, compound or crossbow — it’s beyond time to get started.
We’re all busy, though. It can be hard to find time to fling arrows if that requires having to drive somewhere to do it safely.
But if you could shoot in your backyard? That’s theoretically convenient, but potentially problematic.
I live in the suburbs, with a sidewalk in front of my house and neighbors close by on both sides. My backyard is pretty open, however, and it ends at a creek, the far side of which touches a crop field. A few trees and some brush line the banks on both sides.
That’s a good start. Still, I was never entirely comfortable shooting back there. Though the creek is fished rarely after Memorial Day and the trees and other vegetation provide a natural barrier to keep an errant arrow from going too far, no one wants an accident.
So, figuring it’s better to be safe than sorry, I decided to build a backstop to put behind my targets.
This one is a mash-up, bits and pieces of several designs I found online melded together to fit my needs. It cost about $200 to build, since I had some of its parts already in the garage. Almost half of that price tag, though, is attributable to its 8-inch caster wheels.
The creek, you see, floods. Twice this year, it’s come over its banks, high and fast enough the last time to leave a 30-foot log as big around as your thigh wedged up against our apple trees, where it’s still waiting to be cut. The wheels will, so long as I act fast enough, allow me to roll the backstop to higher ground and out of harm’s way if necessary.
If you want to build something similar, and your yard stays high and dry, you could skip them and trim the cost considerably.
What you’ll need
Otherwise, to replicate this, you’ll need a 4-by-6-foot horse stall mat. It’s the basis of the backstop. The one I got at a farm supply store is ¾-inch thick and heavy. It cost about $60 with tax.
Then I bought four 8-foot two-by-fours for about $5.50 each. I cut two into 6-foot lengths to make the horizontal part of the backstop frame, and a third into 4-foot sections to make the vertical parts of the frame. I used some 1⅝-inch deck screws and washers costing about $22 total to attach the horse stall mat to the frame pieces.
On the back side of the mat, I used the leftover ends of those boards and some others in the garage to make angled supports.
The fourth two-by-four, cut in half, serves as the horizontal bases. The wheels are attached to them with 1½-inch lag bolts leftover from a previous project.
I centered the backstop on those, then used more leftover two-by-fours — I knew those odds and ends in the garage would come in handy someday — to make angled supports connecting the wheeled base pieces to the backstop itself. Two on-hand two-by-threes cut to 6-foot lengths link the bases horizontally, right in front of and right behind the upright backstop, to keep the whole frame from wanting to twist when rolled.
So far, it’s working pretty well. The mat has proven stout. Intentionally shooting arrows at it from hunting-scenario distances with a compound bow has failed to send one all the way through (I haven’t experimented with crossbow bolts yet, but am hopeful it will stop them as well).
If I had to do one thing over, I’d pick different wheels. The ones I have — two that swivel and two are fixed — came in a set, and since that’s what I have on a homemade kayak/canoe cart in my garage, it seemed like that configuration would work here, too. Rolling them over less-than-flat ground, though, can be tricky without a second person. Four swivel wheels might work better.
But that’s a tweak I can always make later.
Right now, it’s time to get tuned in and ready for archery season. That holds my attention. Now, if I can just quit shaking when deer appear ...
Archery deer seasons
The archery deer season in Wildlife Management Unit 2B — as well as in Wildlife Management Units 5C and 5D in eastern Pennsylvania — runs from Sept. 20-Nov. 28, Sundays included, and from Dec. 26 - Jan. 24, 2026. There is no hunting on Sundays in the latter portion of the season.
The statewide archery season runs Oct. 4-Nov. 21, Sundays included, and from Dec. 26-Jan. 19, 2026, excluding Sundays.
Hunters are allowed one antlered deer a year and one antlerless deer with each required antlerless license or Deer Management Assistance Program (DMAP) permit.






Comments
Welcome to Post-Gazette subscriber-only commenting community. Please review our community guidelines.