This is the fourth in a series about handling stormwater in the home landscape.
Rain gardens are beautiful, functional and an effective way to maximize the capture of rainwater on your property.
They are interesting landscape features that absorb the rain from roofs and driveways and keep runoff from entering stormwater drains and taxing our water treatment systems
Rain gardens purify and filter out pollutants, replenish aquifers and reduce potential downstream flooding. If you choose plants carefully, they also appeal to pollinators and birds, bringing nature to your garden.
The best place to locate a rain garden is near where downspouts empty or downhill from areas prone to erosion or runoff from impervious surfaces such as paving. Here are more tips for site selection:
• Plan the garden at least 10 feet away from a structure’s foundation to prevent infiltration into the space.
• Decide where you want to view it. Is it to be a feature seen from your house or a place with a pleasing street view or some attractive screening?
• Don’t choose a spot where water tends to pond; you want the water to infiltrate the soil.
• Check local municipal requirements and be sure to locate underground utilities.
• Don’t place your garden over a septic system, drinking water well or at the base of a tree.
Once a potential site is identified, do a drainage test by digging 18 inches deep. Fill the hole with water and allow to drain. Refill the hole with water and assess the infiltration rate by checking with a ruler each hour.
If the hole drains at a half-inch per hour, it will work as a rain garden. If the rate is less than that, choose another location.
To determine the size and depth of your rain garden, check the calculator at raingardenalliance.org. A gently sloping or nearly flat area is typically dug to a maximum depth of 6 inches. Areas with up to a 12 percent slope will need to be dug more deeply, up to 8 inches on the high side of the slope to produce a level bottom. You will need to build a berm on the lower end to keep water in the garden. Remember the goal is to keep water on site. Areas in excess of 12 percent slope are not suitable for rain gardens.
Dry streams or trenches filled with gravel can assist the flow of water into the rain garden and can be an attractive addition. Observe how water flows into your rain garden, and if erosion is occurring, a channel may be required in that area.
The extra digging of a rain garden involves a bit more sweat than a typical bed. Once planted, they require typical maintenance. Choosing a mix of shrubs, perennials and groundcovers that will naturalize and spread will reduce the amount of time needed to maintain it.
Plant choices include those covered in a previous article in this series: wet zone plants. The center of the garden will hold water the longest. The perimeter can hold most of your favorite plant choices.
Our region has its challenges with flash flooding and aging stormwater infrastructure. In creating a rain garden, you are doing your part to alleviate these problems. It goes a long way toward improving the environment and our quality of life.
Carol Papas is a Penn State Master Gardener. This volunteer program supports the outreach mission of Penn State Extension and provides research-based information on best practices in sustainable horticulture and environmental stewardship. Information: contact the Penn State Extension of Allegheny County at alleghenymg@psu.edu or 412-482-3476.





Comments
Welcome to Post-Gazette subscriber-only commenting community. Please review our community guidelines.