Question: I want to buy a new receiver and am confused by the amplifier specifications. How do I know what they mean and what I need?

GARY K.

Sewickley

Answer: When choos­ing an am­pli­fier or re­ceiver, the first things to con­sider are the speak­ers’ sen­si­tiv­ity and the room size.

Advertise with us

Speak­ers have a sen­si­tiv­ity rat­ing (also called ef­fi­ciency) that spec­i­fies how many deci­bels of sound they pro­duce from one watt of power when mea­sured from one me­ter away. Num­bers above 90 are con­sid­ered very ef­fi­cient, 87-89 is av­er­age, and be­low 87 is in­ef­fi­cient.

The lower the sensitivity, the more power you need. To make a 3 deci­bel dif­fer­ence you must dou­ble the power, so the dif­fer­ence be­tween an 87 deci­bel and 90 deci­bel sen­si­tiv­ity rat­ing is ac­tu­ally quite large. A pair of speak­ers with a 90 deci­bel sen­si­tiv­ity rat­ing with a 50-watt am­pli­fier will per­form the same as a pair of 87 deci­bel rated speak­ers with a 100-watt am­pli­fier.

Though it seems to be a paradox, bigger speakers are usually more efficient than smaller speakers.

Room size is sim­ple. The big­ger the room, the more power you will need.

There is also a speaker rat­ing called im­ped­ance. Most speak­ers are 8-ohms, which most any am­pli­fier can han­dle. If your speak­ers are rated at 6-ohms or 4-ohms, make sure the am­pli­fier is rated to work with them. Many re­ceiv­ers are 8-ohms only.

Advertise with us

Next, check the spec­i­fi­ca­tions of the am­pli­fier it­self. What you want to check are the rated band­width, Total Har­monic Dis­tor­tion or THD, and sig­nal-to-noise ra­tio. Man­u­fac­tur­ers do not al­ways pro­vide the sig­nal-to-noise num­ber.

The hu­man ear can hear be­tween 20 Hz (deep bass) and 20,000 Hz (high tre­ble.) The best am­pli­fi­ers are rated be­tween 20-20,000 Hz. Some­times a man­u­fac­turer will rate an am­pli­fier at a sin­gle fre­quency such as 1,000 Hz. This is mis­lead­ing and al­lows the man­u­fac­turer to ad­ver­tise a higher watt­age num­ber. A THD rat­ing be­low .1 per­cent is in­au­di­ble to the hu­man ear. The best solid-state am­pli­fi­ers are rated be­tween 20-20,000 Hz with less than .1 per­cent THD. Tube amps typ­i­cally have higher THD but will still sound ex­cel­lent.

To com­pli­cate mat­ters fur­ther, most mul­ti­chan­nel sur­round sound re­ceiv­ers are mea­sured with just one or two chan­nels driven. That’s why a sep­a­rate am­pli­fier rated at 75 watts per chan­nel with all chan­nels driven will be no­tice­ably more pow­er­ful than a 100 watt re­ceiver rated with one or two chan­nels driven.

There is also the mat­ter of cur­rent, which I will not delve into here. High cur­rent is es­pe­cially im­por­tant if you have low im­ped­ance speak­ers rated at 4-ohms. If you have a pow­ered sub­woofer you can get away with less power to the main speak­ers be­cause the sub­woofer will re­pro­duce the power-hun­gry bass sounds and leave all the re­ceiver power for the speak­ers.

To sum it up, look for a re­ceiver or am­pli­fier rated be­tween 20-20,000 Hz, less than .1 per­cent THD. A sig­nal-to-noise ra­tio above 95 deci­bels is ex­cel­lent. A re­ceiver with 50 watts per chan­nel should be ade­quate for small- to me­dium-sized rooms or speak­ers above 90 deci­bels sen­si­tiv­ity. If you have a large room or speak­ers be­low 87 deci­bels sen­si­tiv­ity, try and get 100 watts or more.

Next week I will pro­vide some am­pli­fier com­par­i­sons, a few ex­am­ples of match­ing am­pli­fi­ers and re­ceiv­ers to speak­ers, us­ing some of the best val­ues on the mar­ket.