Question: I have a high-def TV with HD cable service through Comcast. I recently bought an iLive 3.1 Channel Home Theater Bar Speaker. It looked simple to set up and has an iPhone dock (the two reasons why I chose the product) plus it was inexpensive.
I don't know if I should set it up or if I should return it. Currently I use an HDMI cable from the cable box to my TV, and it looks like I would have to give that up and set up everything through the sound bar with old type RCA cables. This sounds like a step backward.
Would the sound bar setup give me more sound? Recently I could hardly hear the words in a movie. For example, a Mel Gibson movie on OnDemand had rain and I couldn't hear the dialogue for all the rain. To make it clear, I want more sound from voices but less from effects, not just more sound.
DIANNE POWELL
Answer: This is a question I often receive from readers watching Blu-ray Disc or DVD movies. What you have is problems with dynamic range. Unless the volume is the same as the movie theater, the sound effects can drown out the voices. Effects are recorded at louder levels than the dialogue so when played at normal volume in a home, many people find it hard to hear the actors.
You may be able to fix the problem without using the sound bar. Check your cable box for a Dynamic Range Control (DRC) setting in the audio menus. This will equalize the sound between the sound effects and the voices. The same setting is found in most every DVD and Blu-ray player as well.
The sound bar will give you more sound, though it may not solve the problem unless you play it louder than you currently play the TV. If you decide to use the sound bar, I would not give up the HDMI connection between the cable box and the TV. Just use two cables, one to the TV and one to the sound bar.
Your sound bar has a miniplug jack, which is not likely to be present on your cable box. To connect the cable box and speaker, get an RCA audio-to-miniplug cable and connect the red-and-white RCA outputs on your cable box and the plug to the sound bar. The cable box may have its own volume control; so be sure to adjust it to about 75 percent while turning the TV volume to 0. This will send a strong signal to the sound bar, which you can fine-tune using the sound bar's volume control.
The best solution (and most expensive, of course) would be an HDMI audio receiver and a good quality surround bar speaker. Such a system can be built for around $500 to $600 now; so if you ever want to upgrade the sound quality and add surround while eliminating the problem forever, that is the way to go.




Comments
Welcome to Post-Gazette subscriber-only commenting community. Please review our community guidelines.