TOLEDO, Ohio — The deadly crash Tuesday night of an Amtrak train is likely to inspire renewed calls for stronger railroad safety systems to govern trains’ speed in the event their engineers fail to do so properly.

Seven people were killed and scores were injured when the New York City-bound train derailed on a sharp curve at Frankford Junction in north Philadelphia.

It may take a while before any information from the train’s event recorder, its “black box,” becomes public and considerably longer before a cause of the derailment becomes official.

But if, as reported Wednesday by federal investigators, the train was traveling faster than 100 mph when it wrecked, it was going substantially faster than allowed even on the straight track immediately before the curve.

Advertise with us

That stretch south of the curve has a speed limit of 70 or 80 mph, depending on which of four main tracks a train is using, while the speed limit on all tracks through the curve is 50.

Other parts of the busy Northeast Corridor between Washington, D.C., and Boston have speed limits of up to 150 mph, but immediately north of the Frankford curve, the speed limit is 110 mph.

The Philadelphia wreck was similar to one that occurred in New York City on Dec. 1, 2013, in which a Metro North commuter train entered a 30-mph curve at close to 82 mph and derailed, killing four passengers. Its engineer later admitted to being in a “daze” before the crash, and investigators found he had an unreported apnea condition that may have interfered with his sleep cycle.

While the Philadelphia crash is one of the more deadly U.S. train wrecks in recent years, it is far from being among the worst in American history. It’s not even the worst at this location.

On Labor Day 1943, a Pennsylvania Railroad train packed with 541 passengers derailed on the same curve, killing 79 passengers, many of them servicemen on leave during World War II. That crash was blamed not on speed but, rather, on a failed journal bearing that caused a dining car’s axle to lock up.

Advertise with us

The passenger cars involved Tuesday night were all close to 40 years old. But the locomotive leading the train was among Amtrak’s newest, delivered just last year at the start of a complete replacement of the electric engines used in the busy corridor between Washington and Boston.

The worst accident in Amtrak’s 44-year history remains the “Sunset Limited” crash in 1993 near Mobile, Ala., in which a tugboat and barge struck a railroad bridge and knocked it out of alignment. Forty-seven people aboard the train were killed when it derailed on the misaligned track and plunged into Big Bayou Canot.

The second-worst for Amtrak was the 1987 collision between Amtrak’s “Colonial” and Conrail freight locomotives in Chase, Md., that killed 16 people and injured 170.

Most of the United States’ highest railroad accident tolls date to the late 19th and early 20th centuries, when carriages were built mainly of wood, stoves provided heat and safety systems were primitive.

The death toll from the 1987 “Colonial” wreck in Maryland might have been much higher had the train’s front cars not been mostly empty. Even so, that crash had far-reaching implications for the industry.

Advertise with us

The Conrail locomotives had passed a red signal and merged onto the track upon which the 100-mph Amtrak train was approaching. The Conrail crew, which later tested positive for marijuana, had failed to notice that an on-board alarm, which should have sounded if the locomotive passed a signal inappropriately, had been disabled by a previous crew.

Its engineer would later serve four years in prison for vehicular manslaughter and lying to investigators.

In the wreck’s aftermath, new regulations were passed regarding licensing of train engineers and conductors and for random drug testing of workers in “safety sensitive” transportation jobs, while a system called Locomotive Speed Limiter was developed for the Northeast Corridor line to enforce trains’ compliance with signal indications.

But the LSL system is not set up to enforce speed limits on curves or bridges. Tuesday’s crash is likely to step up regulatory emphasis on such safety systems.

After a deadly 2008 collision involving commuter and freight trains blamed on the commuter engineer’s on-duty text messaging, Congress passed and President George W. Bush signed legislation requiring major rail lines to install Positive Train Control systems that would include such speed control.

Advertise with us

While that law required installation by this year, that deadline is virtually certain to go unmet even by Amtrak, which as a government-funded, quasi-public institution might reasonably be expected to be first to comply on the Northeast Corridor, most of which it owns. Congress is considering legislation to extend the PTC deadline to 2020.

The Block News Alliance consists of the Pittsburgh Post-Gazette and The Blade of Toledo, Ohio. David Patch is a reporter at The Blade: dpatch@theblade.com or 419-724-6094.