Eighteen-year-old Connor Columbo of Hampton has “wanted to build stuff” since he was a little kid.

The Shady Side Academy senior took that penchant for making things and focused it on a project that involves the creation of prosthetic hands for poor people, primarily children. He uses his own 3-D printer and the manpower of other Shady Side Academy students who want to help him help others.

“Connor is a child with a wonderful brain who wants to use it for good,” said Michele Ament, Shady Side Academy’s math department chairwoman and director of the school’s senior school service learning club. Club members — there are about 50 — meet on Monday afternoons with Connor to make the artificial hands, which are based on a pattern from a nonprofit group called e-NABLE.

Jennifer Owen, an e-NABLE volunteer and the wife of Ivan Owen, a co-designer of the first e-NABLE prosthetic hand, said Connor and kids like him are changing the world.

Advertise with us

“We’ve found that more and more kids are getting involved, jumping right in. ... The 3-D printer (at their school or in their home) can be used for something that can help someone else. It can be used for something other than useless trinkets,” said Ms. Owen, who lives with her husband in Arlington, Wash., an hour north of Seattle.

The e-NABLE group is a global network of volunteers, a growing number of whom are students, Ms. Owen said. They use 3-D printers to create printed prosthetic hands for people around the world who would otherwise be unable to afford a prosthetic.

The devices are free.

Founded in 2013, e-NABLE is a web-based community with about two-thirds of its volunteers in the United States. There are thousands of members and the numbers are growing each week, Ms. Owen said. A significant portion of that growth involves youths like Connor.

Current estimates are that about 1,500 hands have been distributed to people in more than three dozen countries. Most recipients are children, according to a website for e-NABLE.

Advertise with us

Recipients must have a functional wrist or elbow to make the e-NABLE devices work properly. The prosthetic hands open and close, using the flexing of the wrist or elbow to create the tension to pull the prosthetic fingers closed.

The website and Ms. Owen acknowledge that the devices should be viewed as tools and not fully functional prosthetic hands. They don’t have the capabilities of a true prosthetic hand. For example, they can hold only a few pounds of weight and the fingers do not move individually. But, they can hold water bottles or a snack or a baseball bat or a ball. Most importantly, they are free. In contrast, fully functional prosthetic hands cost thousands of dollars, Ms. Owen said.

For Connor, the seeds of this endeavor took root as an early elementary student when he began “playing around” with making shapes. Finding Legos “limiting,” he said, he began making his own shapes with “duct tape. Lots of duct tape.” As he got older, he became interested in web design. Meshing his interests, he began using the computer to learn about “ridiculously cool, leading edge things going on in science.”

The son of Bill and Sheila Colombo, who worked until retirement in business management and as a teacher, respectively, Connor ultimately decided the best tool he could obtain would be a 3-D printer. “You can build almost anything. They are very mechanically simple though they can do something profound,” he said.

As a freshman in high school, he said he wanted one but couldn’t afford the “unreasonably expensive” price of about $1,300. Then, someone came upon the idea of using a 3-D printer to make another 3-D printer. Connor found a design for free online. After several months of research, then obtaining rudimentary materials such as wood and motors, he had built a “shoddy but functional” 3-D printer by the end of his freshman year of high school.

Advertise with us

The first thing he made — which came after a lot of trials and failures — was a cube. Then came the model of a water molecule that he used to decorate his bedroom desk.

Ultimately, he started a business in his home, making things such as wheels for a car in a fellow student’s school physics project. Using the money he was bringing in to acquire materials and additional printers, by his junior year he had grown his business into an enterprise that was yielding between $3,000 and $5,000 annually.

Then, he saw on a computer message board that the e-NABLE group was looking for volunteers to make the hollow, plastic hands.

“It blew my mind. The thought hadn’t crossed my mind before that you could print prosthetics. I always thought of [my 3-D printer] in terms of making prototypes or trinkets or cheap stuff, fun stuff. I never thought of using it to make something that could have such value or such impact on someone’s life,” he recalled.

He made his first hand in the middle of last summer.

Advertise with us

One spool of plastic, which can yield eight or nine hands, costs $20.

But often he is able to use leftover plastic from jobs that someone has hired him to complete. The problem was the time it took to assemble the pieces. When printed from his printer, the hands are in pieces, stuck to a board called a raft. It takes about 90 minutes to clean, smooth and assemble the pieces. And that’s before any wires or padding are attached to the hands.

So, he approached Ms. Ament earlier this school year to see if members of the Shady Side school’s service club would be willing to help. And they were.

She recalled when he approached her, showing what he was printing and how the pieces could be turned into artificial hands. “He said he would like help pulling them apart and sanding them and then assembling them. ... He was so very matter-of-fact. I was just so impressed,” she said.

So far, a dozen hands have been manufactured by Connor and his team. They have been turned over to e-NABLE for shipping to recipients.

Advertise with us

Connor, who is interested in studying robotics, said he doesn’t view people who were born without a hand or who lost a hand in a catastrophic event as disabled. “It’s not the people who are disabled. It’s the technology that’s disabled,” he said.

He wants to spend his life improving technology and using it for the benefit of people.

Karen Kane: kkane@post-gazette.com or at 724-772-9180.