Seasoning a Dutch oven achieves two important objectives. It forms a barrier between moisture in the air and the surface of the metal, preventing rust. It also provides a non-stick surface as effective as any commercially applied coating.

• To season a new Dutch oven, scrub well with steel wool and warm water to remove the protective coating applied at the factory.

• Allow the oven to dry while preheating an electric oven to 350 degrees.

• After the Dutch oven is dry, place it with its lid ajar in the electric oven until it is just barely too hot to handle.

Advertise with us

• Remove and allow the Dutch oven to cool to the touch. Using a paper towel, smear a thin layer of salt-free cooking oil (peanut, olive, canola or plain vegetable oil are all fine) over every square inch, inside and out of the Dutch oven and lid.

• Place the Dutch oven back in the electric oven and bake at 350 degrees for one hour.

• Remove the Dutch oven, allow to cool, and repeat the oiling-baking process.

• Remove, apply another light coating of oil and store.

Going Dutch

Advertise with us

Once your Dutch oven is properly seasoned, routine care ensures it remains an efficient cooking utensil.

• Never allow cast iron cookware to sit in water or allow water to stand inside it. It will rust even a well-seasoned coating.

• Never use soap to clean a Dutch oven or any cast iron cookware. If soap is used, the oven should be put through the seasoning process again.

• Never place an empty Dutch oven over a hot fire. Intense heat will crack or warp the vessel.

• Never hurry to heat a Dutch oven for cooking. Take your time and use burned-down coals.

Advertise with us

• Never put cold liquid into a hot Dutch oven. It will crack on the spot.

Adapted from "Let's Cook Dutch" by Robert L. Ririe, (Horizon Publishers).