In the "why didn't someone think of this before" category comes Pumpkin Glow, a product that promises to preserve your carved jack-o-lantern for 10 days or more.

Steve Mellon/ Post-Gazette

Pumpkin Glow is supposed to preserve carved pumpkins ... but does it?

Pumpkin Glow ($4.95 a bottle, enough to treat two pumpkins) is supposed act as a "second skin to seal in your pumpkin's moisture, prohibit mold growth and keep carvings lasting longer and looking better," according to its distributor, Innovative Products.

Advertise with us

Unfortunately, for us, Pumpkin Glow was a smashing failure.

I asked the Miami, Fla., company to send me a sample to test. It sent one bottle and immediately e-mailed me to say it had mixed up the solution incorrectly and that it would be sending a new bottle shortly. This didn't give me a lot of confidence.

For the test (with the new bottle), I purchased a medium-sized pumpkin to make sure I didn't run out of the solution. My son designed the jack-o-lantern, and I applied the solution as soon as we cut the pumpkin.

Pumpkin Glow has the look and consistency of Elmer's glue and goes on easily with the foam applicator included in the package. You coat the entire inside of the pumpkin, paying special attention to the carved areas. According to the directions, the white solution turns clear in six hours, and that is what happened. The material also never dries completely. I placed the pumpkin inside the house because it was unseasonably warm outside.

The Web site, www.pumpkinglow.net, shows photos of the inside of pumpkins, sliced in half -- with and without the solutions. The treated one starts to show mold on the 10th day, while the other only makes it through Day 4. I put Pumpkin Glow on the freshly cut pumpkin Monday night and by Thursday, black spots had started to appear inside. By Sunday, the pumpkin was black and shriveled.

Advertise with us

I won't be stocking up on Pumpkin Glow any time soon, but I did receive a tip about another solution to the same problem.

An e-mail from Better Homes & Gardens suggests using a paint sealer before and after painting pumpkins to make them last longer. Sounds like that's worth a try.

-- Virginia Linn, Lifestyle editor

Snuggly insulation

Dow Chemical's SAFETOUCH insulation comes in two thicknesses: R-13 for 2-by-4 wall construction and R-19 for 2-by-6 walls.

Advertise with us

If you're carving a pumpkin, it must be fall. And fall's a great time to improve your home's insulation before the snow flies.

Fiberglass is one of the most cost-effective types of insulation for the do-it-yourselfer. But it has a big downside: It's itchy and you need to wear a mask to avoid breathing in glass fibers.

Coming to the DIYers' rescue is Dow Chemical's SAFETOUCH insulation. It's made from a fiberglass-free plastic fiber that the company says is also used to make clothing and bedding. (After feeling a sample, I'll admit it's soft but I still wouldn't want to wear it or sleep on it).

Besides being safe to handle with bare hands, the batts can be torn into pieces for smaller spaces. SAFETOUCH comes in two thicknesses: R-13 for 2-by-4 wall construction and R-19 for 2-by-6 walls. A 93-inch-long R-13 batt covers 77 1/2 square feet and the R-19 batt 58 square feet.

Both sell for $49.83 at Lowe's in Pittsburgh, Cleveland and Columbus, Ohio.

Advertise with us

Recently named one of the Top 10 Most Brilliant Gadgets of 2007 by Popular Mechanics magazine, the product gets only one knock: It costs about 64 cents a square foot vs. 40 cents for fiberglass insulation. To me, beating the itch is worth a little scratch (www.dow.com).

-- Kevin Kirkland, Home & Garden editor

This story was originally published with images that are no longer available.