This article is the first in a series on handling stormwater in the home landscape. 

Whether your commute takes you on Washington Boulevard or you live near Streets Run Road or along the banks of Loyalhanna Creek, you know that every torrential rain brings the possibility of flash flooding. Local municipalities are making plans to control the flow of water during extreme weather, but there are steps homeowners can take to mitigate potential damage from heavy rain.

The bottom line is that every drop of rain or snowmelt that remains on your property instead of making its way into streams or storm sewers reduces the impact on our water systems.

Infiltration is the process whereby water is absorbed into the soil to be cleansed, stored by plants or flow into aquifers. Runoff is water that is not absorbed, running unabated over solid paving or barren ground. It makes its way quickly into storm sewers or helps small streams to become raging torrents. While water that passes through soil is cleansed of pollutants, water that runs across paved and roofed areas or lawns doused in fertilizer and weed killers is contaminated by oil and chemicals.

Advertise with us

Stormwater can also impact sewage collection systems by improper direct connection or via leaking and cracked pipes. Overloaded sewage systems create overflow before water can reach treatment plants. Untreated sewage is released into our waterways, overflows from manhole covers or backs up into basements.

If you are in an area plagued by frequent, severe flooding, you may need to consult an engineer or landscape architect to handle water issues on your property. If you are only impacted during very heavy rains, or notice that areas of your property remain significantly damper than others, try some of these do-it-yourself ideas to mitigate runoff and keep stormwater on site:

• Reduce impervious surfaces and increase the surface area where water infiltration occurs.

• Plant trees, shrubs and perennials that absorb water and utilize it via transpiration. Water evaporates from the leaves rather than making its way into the ground.

• Manage lawns to reduce pollutants and volume of storm water.

Advertise with us

• Create a raingarden in spots where excess water tends to collect on your property. They intercept rainwater and allow it to soak into your soil.

• Add rain barrels to collect water from your roof.

If you are due to replace pavement or are adding new paths, patios or parking areas, consider a permeable surface. Pre-cast concrete pavers, brick and natural stone are all options. Pavers are suitable for driveways and can be a good alternative to concrete.

Gravel is a cost-effective material for paths and smaller surfaces. It looks and functions best with some type of edging to keep it in place. It can be very attractive when combined with natural stone and with the addition of plants that highlight its texture.

Round gravel ranges in size from ¼ inch to 3 inches or more and is best used in areas where foot traffic is minimal. Smaller pea gravel makes a decent walking surface. Gravel looks terrific along the edges of a foundation, behind plantings or under decks, where it keeps splashing water from dirtying vertical surfaces yet allows water to permeate the ground.

Advertise with us

Crushed limestone is typically light gray and doesn’t visually blend quite as seamlessly into the landscape, but its angular shape makes it less likely to move than pea gravel and it is a better choice for areas used by vehicles.

In future articles, we will cover plantings that tolerate wet and flood-prone environments, lawn management and raingardens.

Carol Papas is a Penn State Master Gardener. This volunteer program supports the outreach mission of Penn State Extension and provides research-based information on best practices in sustainable horticulture and environmental stewardship. For more information, contact the Penn State Extension of Allegheny County at alleghenymg@psu.edu or 412-482-3476.