So you didn't get around to painting the house this summer. Now it's mid-September -- too late, right?
Sorry, honey, your to-do list is still good. Thanks to some of the new premium latexes, you can paint well into October. In fact, Bob Ireland of Du-Rite Painting Contractors in Brighton Heights says he's even painted during warm spells in November.
Sources
Pittsburgh Paints -- www.ppg.com/ppgaf/pittsburgh.
Sherwin-Williams -- www.sherwin-williams.com.
Until a couple of years ago, exterior latex paints couldn't be used at temperatures below 50 or 60 degrees. Then, manufacturers began tinkering with the resins in their formulas so they will flow on and cure down to 35 degrees. Now, Pittsburgh Paints, Sherwin-Williams and others can boast that all of their top-of-the-line paints and some of their primers meet that standard.
Pittsburgh Paints has Manor Hall Timeless, Manor Hall and Sun-Proof paints and SealGrip universal primer. Sherwin-Williams has Duration, SuperPaint and A-100 paint and primer. Both Timeless and Duration are super-premium brands that are also self-priming, which means they are thicker than most and cover in one coat. They retail around $45 per gallon, less on sale.
Mr. Ireland, who has been in business for 28 years, recently used Timeless on a large Victorian house and carriage house in Sewickley.
"I've never seen paint cover like this before in my life," he said.
Timeless was also used this summer on a concrete canopy at Fallingwater, Frank Lloyd Wright's iconic modern house built for the Kaufmann family in Fayette County. Pittsburgh Paints' Permacrete concrete primer was used underneath Timeless latex on a section of the house near the guest house.
Whether you're painting in September or June, preparation is the key. All surfaces -- wood, vinyl or concrete -- must be scraped (if previously painted), clean and dry. Distressed surfaces should be primed even if you're using one of the one-coat premium paints, said Tom Dougherty, marketing manager for Pittsburgh Paints, which makes SealGrip Permanizer to help stabilize damaged wood before painting.
Chalking -- the white residue that shows up on painted wood or vinyl siding -- must sometimes be removed before painting, said Steve Revnew, director of marketing for Sherwin-Williams architectural coatings. He recommends a power washer or a strong detergent and a stiff-bristled brush, followed by a thorough rinsing spray.
After all that washing, the next important step is to wait and let it dry. Fall's lower temperatures mean longer drying times and a heavier dew in the morning. Although you can usually tell by feel, Mr. Ireland recommends a moisture meter to be sure the surface is dry enough to paint. Then, assuming there's no rain in the forecast, you're ready to go.
Lake Fong, Post-Gazette
Chuckie Watson, owner of Watson's & Son Painting, stretchs to paint the corner of a house on a September day in 2004. Thanks to manufacturers tinkering with the resins in their paints, fall's temperatures pose few problems to painting exteriors.
Click photo for larger image.
The experts have a few other words of advice for fall painters:
"The north side of the house gets the least sun and the most moisture. Be conscious of dew," Mr. Revnew said.
To be safe, start in the morning as the day is warming up, he said, noting that Sherwin-Williams' paints will take up to eight hours to cure above 35 degrees.
So, if the temperature is expected to drop into the 30s at night, you'd better knock off by around 3 p.m.
Pittsburgh Paints' cold-weather paints need up to 12 hours above 35 degrees to cure properly, and a 24-hour wait between coats, said Mr. Dougherty.
"It's a shorter painting day in the fall," he said. "You can't paint up until dark. After dark, you get condensation, and that's not good."
Mr. Ireland suggests waiting for a stretch of days when temperatures will remain fairly steady.
"A sudden change in temperature isn't good for anything," he said.
This story was originally published with images that are no longer available.



Comments
Welcome to Post-Gazette subscriber-only commenting community. Please review our community guidelines.