Q. I have a spectacular lavender rhododendron that I would like to propagate. What is best way to go about it? Also, what is the best time to divide rhubarb?
A. The easiest way to propagate rhododendrons in the home garden is called layering. It involves rooting the cutting while it is still attached to the parent plant, and severing it only when it has established a sufficient root system. The process takes roughly two growing seasons. Rhododendrons often layer naturally where stems touch the ground.
Choose stems that easily reach the ground and are pliable. Use the current year's new growth after it has hardened off some in mid- to late summer. You can easily tell it from older growth because it is greenish and pliable, while older growth is brown and woody.
Dig a trench under the chosen stem about 4 inches deep. You are going to secure the stem by covering it with 4 to 6 inches of soil, and bending the tip into an upright position so that it extends 6 to 8 inches above the soil. You may need to stake it to keep it in an upright position, and you also may need to cover the cutting with a brick or other heavy object to keep it in the ground. You also could use a sod staple or the curved part of a wire coat hanger to pin the stem into place. Be sure to strip off any leaves that will be buried before covering the stem with soil.
Wounding the stem where it bends up out of the ground will help encourage rooting. Make a shallow, slanting 2-inch cut either before or after the bend, on the underside of the cutting where it contacts the soil. You also can dust the wound with a rooting hormone such as Rootone (widely available at local garden centers), although it is not absolutely necessary. Then secure it into the trench as described above.
During the growing season, be sure to water the rooting stem periodically if we get into hot, dry weather, but do not overwater. A 2- or 3-inch layer of mulch will help conserve moisture in summer. You can gently tug on the tips to see how rooting is progressing the following spring, but allow the layers to remain attached until fall.
By then, they should have developed a sufficient root system to survive on their own, and you can sever the layers from the parent plant. Leave the layers in place through the winter, and then transplant them to their permanent locations the following spring.
Rhubarb can be divided in spring or fall, although most gardeners favor spring. In spring, divide rhubarb as soon as it pokes up out of the ground so you can see where it is and avoid damaging the crown as you dig. If you divide in fall, mid- to late September is best so the divisions have a chance to re-establish their roots before winter comes.
Dig the crowns carefully to keep the root system as intact as possible. Split so that each piece has at least two buds or "eyes" and as much of a root system as possible. Replant the divisions promptly so that they do not dry out. Harvest lightly, if at all, the first year after dividing.




Comments
Welcome to Post-Gazette subscriber-only commenting community. Please review our community guidelines.