Buy the best-quality lights you can afford. They will last longer and perform better.

Buy a large enough transformer to handle all the lights you'll need plus a couple of extras. Make sure it has enough terminals to do multiple runs; you don't want all your lights on one wire.

Be aware of spacing. If you have several interesting features close together, don't try to light them all.

Balance is important. Everything doesn't have to be symmetrical, but the numbers and intensity of lights should be relatively balanced.

Advertise with us

Position fixtures near a door so they don't shine in the eyes of someone entering or leaving. Also, direct lights so they don't shine in windows, especially bedroom windows.

Lights placed high on the house can gently illuminate an entire yard for parties. But such lights also can create a glare for guests looking back at the house from the yard.

Use submersible lights to dramatically illuminate a pond or water feature, if the water is clear. If it's not, uplight a tree or architectural feature nearby, and it will be reflected in the still water.

Place lighting under railings, benches and stairs to increase safety.

Avoid the lone soldier. Even though you may have an interesting feature, a single light by itself can be distracting.

Advertise with us

Lights can perform double duty. For instance, an uplight on a tree can help light a walkway.

When you're finished, leave all wiring above ground for a few nights so you can easily make changes.

Plan for lighting. If you're adding paths or steps to a landscape, install 2-inch plastic conduit underneath so wiring can be added later.

Sources: Paul Patrick, Outdoor Lighting Perspectives; Tim Esken, Esken Landscaping; Philips Lighting Co.; Sea Gull Lighting Products.