The exhibit hall at the David L. Lawrence Convention Center swarmed with thousands of people this week. Vendors sprawled across five exhibit halls with eager salespeople hawking roller bearings and lifting magnets, refractory materials and blast furnaces.
Booths featured bartenders mixing free booze and a full schedule of tech demonstrations. A Chevrolet Silverado — a vehicle built, conference participants dutifully noted, with high-strength steel — was given away. A steel-themed escape room asked attendees a pressing question: “Can You Handle The Heat?”
Such was the carnivalesque atmosphere of the world’s largest annual display of steel technology at a time when investment is being poured into the American steel industry.
For four days this week, the event organized by the Association of Iron and Steel Technology drew nearly 8,000 people to Pittsburgh for speeches, panels, research presentations, plant tours and networking sessions.
More than a year after the industry was lifted by U.S. tariffs on foreign imports — a long-sought measure that effectively makes American steel more competitive in the domestic market — the mood was nothing short of celebratory. In excess of $10 billion of investment has funneled into the nation’s steel plants in the last year, money going to technology like that on the Pittsburgh exhibit floor.
“This trifecta of favorable policy, favorable demand, and favorable earnings has created an environment where mills can aggressively reinvest,” said Jim Dudek, U.S. Steel’s vice president of asset revitalization and manufacturing excellence, said during a packed breakfast session early in the week.
Read More
“We’ve entered a golden era of growth and innovation, an era they will probably write about in the history books,” he declared.
For the association that hosted — a 12,700-member organization focused on steel technology and headquartered in Marshall — the conference offered a stage for its members to shine.
Researchers holed up in smaller rooms for more than 100 technical sessions throughout the conference, exploring subjects like “lubricant development for hard steel rolling” and high-temperature defects detected on light-gauge coated sheet steel produced from thin slabs.
The steel industry is looking to use smart sensors and lasers to prevent major plant shutdowns by predicting when machinery needs maintenance and assessing performance issues from purchasing iron ore to shipping steel coils down the line. Drones, robots, artificial intelligence and automation all have the potential to remake how steel mills operate.
Earlier this month, U.S. Steel announced a $1 billion investment in the Mon Valley Works to improve efficiency by combining its casting and rolling operations — essentially merging two separate facilities into one. The company said the move will lower emissions and make new types of steel.
But at the conference, there was also an air of caution.
Steel investors have been discouraged by the prospect of falling prices — one financial analyst coined the term “Steelmageddon” to describe what could happen — due to U.S. steel mill expansions flooding the market with new supply. Shaky economic conditions in Europe and China could lower demand in energy and infrastructure.
U.S. auto sales have dropped off in 2019, a troubling indicator for a major steel consumer. And the auto industry already has moved to use more aluminum to make vehicles lighter and improve fuel efficiency. Mills, including the U.S. Steel’s investment at Mon Valley Works, are working to produce lighter types of steel to compete.
“Have we beat aluminum?” said Johnny Jacobs, an executive with Charlotte, N.C.-based Nucor Steel. “I would say that we are in the process of ensuring everyone understands how good steel is compared to aluminum.”
President Donald Trump’s trade war with China, which involved the 25% import tariffs levied in March 2018, earned widespread plaudits from conference panelists.
In a speech Tuesday, U.S. Steel CEO David Burritt showed images of the Mr. Trump speaking at the company’s Granite City Works in Illinois last year, shortly after the company restarted the mill.
After the speech, Mr. Burritt put a little distance between the president’s policies and the industry’s future profits. “We think there’s very strong bipartisan support because it’s the right thing to do,” he said in a press conference.
The goal, in the long run, is to invest when times are good to prepare for any upcoming slowdown.
“We know trade relief comes and goes, and our philosophy is we have to be successful under any economic scenario,” said Barbara Smith, chairman, president and CEO of Commercial Metals Co., at a press conference. The Texas-based steelmaker, which operates electric arc furnaces that recycle scrap metal, was named Steelmaker of the Year.
Investment has lifted the fortunes of suppliers like Moon-based HarbisonWalker International, the largest North American supplier of refractory products and services. The company is increasing capacity by 25% this year at refractory plants that serve the steel industry, primarily in Michigan and Ohio.
“Steel is so important to us because it drives so much volume,” said Carol Jackson, the company’s chairman and CEO, in an interview on the sidelines of the conference.
Refractory materials, which are designed to withstand intense heat and pressure, are key to helping mills operate more efficiently, Ms. Jackson said. Most refractories come into play in the ladles, the furnaces, the casters — enough to account for about 55% to 60% of annual revenues and volumes.
“Where steel goes, we go,” she said.
By turning to digital technology, the industry is in some ways catching up to other manufacturing sectors. At the first major steel conference on digital technology, held in March by the AIST, software developers and mill engineers talked about the long road ahead.
This week, the technical sessions illuminated American companies lagging behind: 72% of the presenting authors were from outside the United States.
“We must think of steel leading the digital transformation for all heavy industries,” said Mr. Dudek, of U.S. Steel.
Unlocking the opportunity might hinge on the next generation of workers — and it might be as challenging as getting out of the Steel Escape Room.
A group of students from Michigan Technological University, with the help of three steel companies, designed the Steel Escape Room to resemble the inside of a “pulpit” — a control room usually lodged high in mill.
The prompt: determine the right mixture of elements to keep the mill running and prevent the plant from overheating. In 20 minutes.
The participating companies — ArcelorMittal, Gerdau and Nucor — “were looking at how to engage with students and get them more interested in steel,” said Ryan Thompson, a mechanical engineering graduate who designed and built the 22-foot mobile trailer last summer.
When groups at the conference completed the mission, the feedback was engineered for encouragement.
“Congratulations! You’ve found the recipe for steel,” it read. “There may even be a promotion in your future.”
Daniel Moore: dmoore@post-gazette.com, 412-263-2743 and Twitter @PGdanielmoore





Comments
Welcome to Post-Gazette subscriber-only commenting community. Please review our community guidelines.