QUESTION: I am trying to build a little home theater in my garage. Do you have any recommendations for HD projectors? I'd like to keep the projector price around $500. I found a Sharp XV-Z12000 for about $375, with about 200 hours of use on the lamp. Do you think it is a good buy?

DENTON DAVIS

ANSWER: The Sharp XV-Z12000 was an OK projector in its day and it seems like a fair deal for $375, but you have to look at the big picture (no pun intended.) The projector was introduced in 2005, making it a 6-year-old design. It has a DVI input, not HDMI, so you need an adapter. That's easy to work around, but still not ideal and gives you an idea of how old the projector really is.

Not to mention, how do you know for sure how many hours the lamp has been used? Is there a timer in the projector and are you sure it is referring to that specific lamp? When the lamp does need to be replaced, the price for the replacement is pretty stiff. I did a price search and the lamp is almost $500, more than the used projector itself.

Advertise with us

You can get a brand new projector for a few hundred more than the cost of the used one, and DLP projectors can have color wheels that fail with time. I'd not risk the used one given all these considerations. I'd strongly recommend you look at a new projector such as an Optima HD66 or an Epson Powerlite 705HD 720p. Both are available for around $600 and replacement lamps are around $200.

Don't forget you will need a screen. There are some great do-it-yourself screen designs to be found on the Web, and I will be writing about projectors and projection screens again in the near future.

QUESTION: I have a 6-year-old Panasonic HDTV receiver, the TU-PT700U, with only one HDMI input. Is there a way to input several HDMI components into this single HDMI port on my receiver?

DEAN AKEY

Danvile, Calif.

Advertise with us

ANSWER: You can use an HDMI switchbox to use multiple connections with a single HDMI input. Make sure you get a powered switchbox that supports HDCP. In the past I've recommended models from Monoprice.com with good success. They sell for around $30.

QUESTION: I bought a vintage NAD 7175PE receiver for my turntable system about a year ago after reading your blog and love it! It is such a great amp, thanks for the recommendation. There's now a recurring issue with the left channel intermittently cutting out. It is not cutting out entirely but going much quieter then jumping back up to full level, along with some static. Could this be a bad relay? I'm already planning to have my local stereo guy check it out but just wondering if you could shed any light on this.

JAY DAVIS

ANSWER: That sounds like dust in the dials and switches and is a very common issue with older gear. A thorough cleaning will get rid of it. You can try some contact cleaner to try and clean it yourself, or better yet, take it to your local audio repairman for a thorough cleaning. After a good going over, your receiver will be good to go for years.