Question: Will there be any possible way to use a VCR to record programs when all broadcasts are digital? My younger family generations are vying to come up with a solution for me, and would hate to see them trying unworkable solutions.

THELMA KLANIECKI, Pittsburgh

Answer: Your VCR will still be able to record when all transmissions are digital, but you will not be able to use its internal tuner. There is an easy work-around.

Digital cable boxes, satellite boxes and converter boxes for older TVs have analog outputs as well as digital outputs. If you have an HDTV simply connect the HDMI output to your HDTV and the analog outputs (yellow/red/white RCA cables) to your VCR. Set the VCR to record the line input (usually called Line 1 or Video 1) and it will record whatever channel the box has tuned. If you are recording something while you are away, you will have to pre-tune the box to the appropriate channel and program the VCR to record the line input at showtime.

Advertise with us

If you want a solution that can be programmed to record automatically, you will need to look into a recorder or cable box that has an "IR blast" that duplicates your VCR remote's infrared signals. The IR blast will start the VCR recording when it tunes the channel and stop the recording when the show is over.

Question: When I review pictures on my digital camera's screen, there is always writing overlaying the image, which I find distracting. Is their any way to get rid of it?

JASON FRANKL, Oakland, Calif.

Answer: Most cameras have a back panel button that says "Display" or "Info." On most cameras it controls the information view in both play and record modes. As you press the button, it will toggle through different information screens, including a setting where all you see is the image itself.

Here's another tip that a surprising number of digital camera users don't know: the zoom controls work in both record and playback modes. When you are reviewing your pictures, if you push the zoom toward the wide setting, you will see multiple pictures displayed. The first time you press it there are four pictures (two across, two high), the second time nine pictures (three across, three high) and so on. Navigate to the picture you want to see and press enter. It's a good way to quickly locate an image among hundreds on a memory card.

Advertise with us

If you press the T button when you have a single image displayed, you will zoom in on the image. Multiple presses get you closer and closer, and you can use the control pad to move around and inspect different areas of the image for detail and sharpness. If the picture is not sharp, you can retake it until you get one that works for you.

You may be surprised at how much detail can be revealed this way. I am traveling as I write this, and today I photographed a cruise ship a quarter mile away using a medium zoom setting. I called up the image on my display and was able to clearly make out enough detail that if you knew someone standing on deck you would probably be able to recognize him.