Pittsburgh Glass Works in Creighton to close on Aug 17

From the moment that raw, rectangular flat glass is loaded onto a conveyor line at Pittsburgh Glass Works’ plant in East Deer, until after it’s cut, heated and shaped into automobile windshields, few human hands touch the product.

Robots guide sheets of glass through most of the fabrication process at this facility long-ago dubbed the Creighton plant because of its location in that tiny community along the Allegheny River 20 miles northeast of Pittsburgh.

Despite the automated processing line, Pittsburgh Glass Works is closing the plant because it’s obsolete compared with more technically-advanced facilities the company operates elsewhere in the U.S., Mexico, and Poland.

Friday will mark the last time in more than a century that glass will roll off the line at the site of the first commercial plant erected in 1883 by Pittsburgh Plate Glass, which would later evolve into the modern-day PPG.

Advertise with us

The old plant has churned out glass used in the first sedans sold with windshields, in airplanes piloted by American soldiers in World War II, and in buildings across the U.S. But now it is shutting down even as community officials wonder if the site can become an economic driver again and worry that an underground fire burning through old fill will scar the area.

“There’s a lot of nostalgia there,” said Joseph Stas, president and chief executive of PGW. He knows the place well, because he managed the facility for PPG from 1984 to 1990.

An image from 1952 shows the site of PPG's first glass-making plant on the current site of Pittsburgh Glass Works in Creighton. (SYSTEM)

An historic plate glass site

Still known as Works #1 because it was PPG’s first, the plant “was the original successful plate glass business in the U.S,” Mr. Stas said. But shifts in demand and company strategies have left it behind.

In the 1950s, employment peaked at between 4,000 and 6,000 workers.

Advertise with us

By the 1960s, its Downtown-based owner stopped making glass at the plant and converted it to a fabrication shop.

In the 1980s, PPG phased out aircraft glass fabrication at Creighton but invested millions of dollars to modernize the plant with computer controlled robotic technology and temperature-controlled kilns.

By 2008, the company had shifted its focus from legacy businesses like glass and chemicals to growing its paints and coatings sales. That year, PPG sold its controlling interest in its automotive glass segment, including the Creighton plant, to a private investment firm which renamed the business Pittsburgh Glass Works. PPG divested the rest of its stake in 2016.

Last year, PGW was acquired by Mexico’s Vitro S.A.B. de C.V.

Then in November, Vitro announced it would shutter the historic plant because the facility would need significant upgrades to produce the windshields that carmakers now demand for technologically-advanced and self-driving vehicles.

Advertise with us

The closure affects a total 240 employees, including almost 200 members of the United Steelworkers. Some were laid off after one production line shut down in March; the rest will be gone after the last of three shifts finishes on Friday.

A ‘not normal’ system

PGW, with more than 4,000 workers worldwide, is headquartered on the North Shore and has a research center in Harmar.

The company’s vision for its own future includes windshields, windows and sunroofs for cars and trucks, as well as designing smart technology and connections for vehicles including self-driving automobiles.

It does not include old stalwarts like the Creighton plant.

Advertise with us

The plant, with a production area of 140,000 square feet that spans two floors, is capable of producing approximately 2 million windshields annually.

Windshields made for the 2019 Dodge Charger on the assembly line on Thursday, August 9, 2018, in Creighton. (Andrew Rush / Pittsburgh Post-Gazette)

One problem is its second floor which is considered inefficient compared to modern, one-level layouts, said Dave Shaffer, plant manager. “Over the years, this site has had multiple missions,” he said. “It’s not optimally laid out at all.”

In manufacturing systems these days, it’s “not normal” to send materials to another floor during the production process, Mr. Shaffer said.

One morning last week, windshields being fabricated for Fiat Chrysler passed through a furnace heated to 1,100 degrees. The glass then traveled by conveyor to the plant’s upper level to be cooled before workers inserted vinyl between each windshield’s inner and outer layers.

The windshields are fabricated from glass manufactured at PGW’s flat glass plant in Meadville, Crawford County.

Advertise with us

At the beginning of the fabrication line, robots cut two pieces of glass — each approximately three feet by five feet — for each windshield. One piece becomes the windshield’s inner layer; one is the outer layer.

Both pieces go through a washer and one surface is coated with a powder. The process keeps them from fusing together in the intense heat of the furnace.

In the furnace, the pieces are bent to the carmakers’ specifications and a robot checks the curvature. Besides Fiat Chrysler, PGW fabricates windshields for automakers including Ford, GM and Daimler AG.

The windshields return along the conveyor to the first floor where robots resume the tasks of expelling air from between the glass layers and checking for distortions.

Human workers look for defects before the windshields are loaded onto trucks to be shipped.

Advertise with us
Christina Stewart, a packer with Pittsburgh Glass Works, moves a windshield made for the 2019 Dodge Charger on the assembly line on Thursday, August 9, 2018, in Creighton. (Andrew Rush / Pittsburgh Post-Gazette)

Sending the work and workers elsewhere

Orders now filled at Creighton will be handled by other PGW operations including facilities in Evansville, Ind.; and Elkin, N.C., said Mr. Stas.

Nearly 40 percent of the salaried workers at the plant will take jobs at other PGW sites, the company said.

Members of the USW are eligible for extended unemployment benefits under the federal Trade Adjustment Assistance Program which assists workers whose jobs are affected by increased imports or manufacturing work that shifts to foreign country.

The union declined to comment on the plant’s closure.

Advertise with us

Mr. Stas said there has been interest from potential buyers in the site, which includes 46 acres between the river and railroad tracks. He declined to be more specific. A company website states PGW has held discussions with the Pittsburgh Regional Alliance about determining a reuse.

PGW is East Deer’s largest employer and taxpayer, said Anthony Taliani, president of the board of commissioners in the town of about 1,600 residents.

While PGW will be responsible for $23,000 in annual property taxes even after it closes the plant, the township will lose about $10,000 a year in the local service tax assessed to employees.

“Depending on whether new owners bring in additional employees, it will have a substantial impact,” said Mr. Taliani.

A caved in floor can be seen on on section of the assembly line at Pittsburgh Glass Works on Thursday, August 9, 2018, in Creighton. (Andrew Rush / Pittsburgh Post-Gazette)

Fire down below

Advertise with us

Mr. Tailani is also concerned about what could be a major obstacle to selling: a fire that’s been burning below the plant for the last year and has caused part of the interior floor to buckle.

Outside the plant last week, flames less than six inches high were seen shooting from a crack in the soil that measures five feet to six feet long and two to three inches wide, PGW said.

PGW attributes the combustion to coal contained in material used as fill under an addition built years ago. The company maintains that the situation poses no harm to employees and that it is developing a plan to extinguish the hot spots.

The federal Occupational Safety and Health Administration and the state Department of Environmental Protection have been notified. Christopher Robinson, area director for OSHA, said the agency closed its investigation in April and did not issue any citations against PGW.

PGW continues to monitor the temperature of the blaze and air quality inside the plant as well as the facility’s structural stability.

Advertise with us

Mr. Taliani said he’s worried that PGW has yet to disclose its plan to remediate the problem and that the fire could damage adjoining properties. The odors could harm local residents, he said.

He has contacted the Allegheny County Health Department to assess the air quality around the facility.

“It’s really not fair to the neighbors of PGW,” he said. “They need to take action to put that fire out.”

Joyce Gannon: jgannon@post-gazette.com or 412-263-1580.