Sound Advice: CD-capable models can be found


Share with others:


Print Email Read Later

Questiojn: We noted your recommendations of the Cambridge SoundWorks tabletop radios and your recent column advising of the clearance sale. We looked into buying a radio from the sale and while the units have AM/FM and Wi-Fi capabilities, they no longer play CDs.

We're looking for a clock radio set-up with AM/​FM and CD playback for a bedroom nightstand. Do you have any recommendations for bedroom radios that can handle AM/​FM and CDs? Internet capability is a bonus but not crucial. Bose still makes a unit that meets those specs, but those rigs are pretty pricey.

TOM ZIEGLER

St. Paul, Minn.

Answer: Unfortunately, CD capability is becoming rarer and rarer as people switch to digital media on their phones and computers. There are still some models out there, though.

If you want a premium radio, check out the Sangean DDR-63. I have not tested one yet, but they have a good reputation. The radio is very full-featured with Wi-Fi, CD, USB and Bluetooth for a street price of $325. It’s a lot more expensive than the Cambridge SoundWorks models, but still much less expensive than Bose — www.sangean.com.

If you don’t need something that is considered hi-fi, try your local Big Lots store. They often have clock radios with CD capabilities from well-known brand names (as well as some obscure brand names). For example, I just checked their website and they had a Sylvania CD Micro Stereo System with CD player, AM/​FM radio, alarm clock and two small speakers for $36. It looks like it would fit fine on a nightstand. I doubt the sound quality is anything to write home about, but it may suit your needs — www.biglots.com.

You could also get a Cambridge SoundWorks radio and use it with a portable CD player (like a Walkman) or with an old CD or DVD player you may have lying around. Just connect the headphone jack to the auxiliary input with a miniplug-to-miniplug cable if using a portable player, and an RCA stereo-to-Miniplug if you are using a CD or DVD player. This will give you the best balance of sound quality and price, but you will be dealing with two components and two power outlets rather than a single, all-of-a-piece unit.

The sale will probably be over by the time this column reaches print, but it is useful advice to anyone to know you can use almost any component with any other if you use the auxiliary input.

Question: I have two tower speakers and an Onkyo 809 receiver. Right now I have the receiver in one corner, and the TV is in the opposite corner (from the receiver) with the Blu-ray player and cable box. Is it possible to "beam" the audio from the TV to the receiver?

TERRY SMITH

Minneapolis

Answer: You could, but this will cut down on both sound quality and convenience because you aren’t use the HDMI switching in your receiver.

You really should have the receiver in the same corner with the Blu-ray player, cable box and the TV. That way you can use HDMI for audio and video signals, and switching through your receiver. Put the Blu-ray player and cable box with the receiver and connect them via HDMI.

Use a wireless HDMI connection to send the picture from the receiver to the TV.

Read product reviews by Don Lindich at soundadviceblog.com.


Join the conversation:

Commenting policy | How to report abuse
To report inappropriate comments, abuse and/or repeat offenders, please send an email to socialmedia@post-gazette.com and include a link to the article and a copy of the comment. Your report will be reviewed in a timely manner. Thank you.
Commenting policy | How to report abuse

You have 2 remaining free articles this month

Try unlimited digital access

If you are an existing subscriber,
link your account for free access. Start here

You’ve reached the limit of free articles this month.

To continue unlimited reading

If you are an existing subscriber,
link your account for free access. Start here